AP Router Cisco 888E 4-Port 10/100

Detailní popis produktu

Routr

• Cisco 888E EFM Router with ISDN backup
• BEZ NAPÁJECÍHO ADAPTÉRU (STANDARDNÍ 12V)

• Communications
  Protocols & Specifications:	ITU G.991.2 (G.shdsl)
  Type:	DSL modem

  Dimensions & Weight
  Depth:	24.9 cm
  Height:	4.4 cm
  Width:	32.5 cm

  Environmental Parameters
  Humidity Range Operating:	10 - 85%
  Max Operating Temperature:	40 °C
  Min Operating Temperature:	0 °C

  Expansion / Connectivity
  Expansion Slots:	1 (total) / 1 (free) x ExpressCard ¦ 1 (total) / 1 (free) x SO-DIMM 200-pin
  Interfaces:	LAN: 4 x 10Base-T/100Base-TX - RJ-45 ¦ Management: 1 x console - RJ-45 ¦ WAN: 1 x SHDSL ¦ USB: 1 x 4 pin USB Type A ¦ WAN: 1 x BRI ST - RJ-45

  General
  Authentication Method:	RADIUS, TACACS+
  Capacity:	IPSec VPN tunnels: 20
  Compliant Standards:	IEEE 802.1D, IEEE 802.1Q, IEEE 802.1x, IEEE 802.3ah, VCCI-II, EN55024, CSA 22.2 No. 60950, EN55022 Class B, AS/NZ 3548 Class B, AS/NZS 60950-1, CS-03, EN 60555-2, UL 60950-1, IEC 60950-1
  Connectivity Technology:	Wired
  Data Link Protocol:	Ethernet, Fast Ethernet
  Device Type:	Router - 4-port switch (integrated)
  Enclosure Type:	Desktop
  Encryption Algorithm:	DES, Triple DES, SSL, PKI, 128-bit AES, 192-bit AES, 256-bit AES
  Features:	Firewall protection, DHCP support, NAT support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Stateful Packet Inspection (SPI), content filtering, DiffServ support, MAC address filtering, Broadcast Storm Control, IPv6 support, Intrusion Prevention System (IPS), Low-latency queuing (LLQ), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), Access Control List (ACL) support, Quality of Service (QoS), Link Fragmentation and Interleaving (LFI), DHCP server, DNS proxy
  Flash Memory:	128 MB
  Network / Transport Protocol:	L2TP, IPSec, PPPoE, PPPoA
  RAM:	256 MB (installed) / 768 MB (max) - DDR2 SDRAM - SO-DIMM 200-pin
  Remote Management Protocol:	Telnet, SNMP 3, HTTP, HTTPS, SSH
  Routing Protocol:	RIP-1, RIP-2, HSRP, VRRP, GRE
  Status Indicators:	Port status, power

  Power
  Power Device:	External power adapter - 60 Watt
  Voltage Required:	AC 120/230 V (50/60 Hz)

  Software / System Requirements
  OS Provided:	Cisco IOS Advanced Security